显示标签为“TBS6925”的博文。显示所有博文
显示标签为“TBS6925”的博文。显示所有博文

2011年7月12日星期二

How to receive Multi Input Stream (MIS) and play it with TBS6925


There are MTV HD and MTV Music HD channels broadcasted on Atlantic Bird 1 satellite 12.5W. This transponder is broadcasted with Multi Input Stream (MIS) mode which means a standard satellite receiver or satellite TV tuner which normally doesn’t have Multi Input Stream feature can’t receive these programs. But with TBS6925 which is a professional level DVB-S2 TV Tuner card you can receive MTV HD and MTV Music HD easily if only you’re under the footprint of Atlantic Bird 1. It seems to be covering the whole Europe including Iceland, North Africa, Middle East, Western part of Russia, Eastern part of North America including part of Canada, Cuba, Dominica, part of Mexico and the whole South America. Check this link http://www.eutelsat.com/satellites/125e_popd.html# in some weak signal region you may need a big dish. But the following report was done on site in Europe by cody, so there is no guarantee that you can receive the same transponder elsewhere.

Before you may start your scan, it’s recommend to download the latest driver and TBSrecorder from TBS download zone(link to http://www.tbsdtv.com/english/Download.html)
This report is tested with combination of TBS6925Driver_V1.0.1.4 and TBSRecorder(V3.0.0.3).
The details of this transponder is:
Atlantic Bird 1 satellite at 12.5 West
12718 H, 36510, FEC 5/6,
8PSK Multiple Input Stream (MIS) transponder with four TS
Stream IDs: 33, 34, 35 36

Here are the screenshots and guide about how to filter MIS stream and watch/record it with DVB player.

1) Use TBSRecorder to lock the MIS frequency and after that choose "Input Stream ID" from the drop-down box and press "Apply" button – in the example MIS ID of 34 is selected:


2) Close TBSRecorder. It's not necessary to run it anymore after the MIS filter is set, i.e. the "Input Stream ID" is selected and applied.

3) (Optional) check with TransEdit that the correct TS stream is filtered (this step is not really necessary).

 After check, you need to close TransEdit.

4) Open your favorite DVB player software (in the example TBSViewer is used, but of course you may use other software like DVBViewer, DVBDream, ProgDVB…) and then scan the same transponder from 1).




scan is finished and four channels are found:

the list of found channels including MTV MUSIC HD and MTV HD.



5) select MTV MUSIC HD or MTV HD channel from the list and watch it, currently they are not encrypted and you can watch these crystal clear HD channels free.


6) more screenshots from MTV HD and MTV MUSIC HD, which are available on the MIS transponder from the example:






7) if you want to change selected MIS ID you need to repeat the step 1) and also if you don't have the channels from that MIS ID in your channel lists, re-scan in your favorite DVB player software.

It’s very easy for you to use the record or scheduled record features of the DVB player software for PVR.




2011年6月20日星期一

How to Use TBS6925 watch satellite TV with XBMC and MythTV


To watch satellite TV on your PC with XBMC and MythTV, you'll need at least one satellite TV tuner card or a satellite provider that offers satellite IPTV access. That Linux TV card hardware doesn't have to be installed on the same computer on which you want to watch HDTV. We'll call the computer with the tuner hardware the backend. The computer used to view TV will be called the frontend. The backend and frontend can be one and the same machine. XBMC will be run on the frontend on linux

TBS6925 PCI-E DVB-S2 Card is a new released professional satellite TV tuner card, which is regarded as one of the best TV tuner card for Mythtv or linux. This mythtv TV card can capture 16 APSK and 32APSK Demodulator. It also supports CCM, VCM, and ACM mode at the same time. The key feature is that TBS 6925 can receiver multiple Transport Stream and Generic Stream .it even can support up to 190 Mbit/s channel bit rate capture. TBS has updated Linux tv tuner drivers which supports all kernels up to 2.6.38, which enable users to freely watch or record HD FTA satellite with XBMC and MythTV in Linux, especially the HD Mediaset channels

As far as we know, XBMC currently supports the following backends:
  1. HTS Tvheadend
  2. VDR
  3. MythTV
  4. MediaPortal
  5. ForTheRecord
So, if you want to run the TV card on Linux, You'll have to install (at least) one of them.

Set up MythTV on Linux
1.    Set up your TV tuner card as DVB type in mythtv-setup's. On the capture card setup page, you will see a button called "DiSEqC." Highlight it and press enter. Start with a blank screen and the word "(Unconnected)." Highlight "(Unconnected)" and press enter. You will see a list of DVB hardware myth can manage. Select "Switch."




6.    Escape out to the top Mythtv-setup menu. Enter the "4.Input connections" menu. Highlight your TBS6925 card and press Enter. You will see a screen unique to DiSEqC setup. Select the DiSEqC switch port with the LNB we are setting up (in the example, port 1).


8.    MythTV will default to the "Tuned Scan." You will need the transponder frequencies, polarities, and symbol rates for each transponder you wish to scan. If the scan fails, check your dish pointing and/or settings and try again. When the transponder has finished scanning, you can press "Back," and attempt a "Full Scan of Existing Transports" scan type.


Set up XBMC on Linux

XBMC Media Center includes a media source that can communicate with a MythTV backend using the Myth Protocol and MySQL database queries to the mythconverg database. This requires that the MythTV configuration is checked to ensure XBMC will be able to communicate with MythTV, which depends on whether XBMC is running on the same machine.

To communicate with a MythTV backend, add a new Source from the Videos section. The source should have a URL that looks like: myth://username:password@i.p.address This URL needs to be specified manually as many skins don't support the ability to configure a MythTV source.

When you select the newly added MythTV media source five folders will be listed:
  • All Recordings - to watch anything that has been recorded all in one folder.
  • Guide - to view the EPG for a channel
  • Live Channels - to display what is currently being aired
  • Movies - to list the movies that have been recorded
  • TV Shows - to list each series of TV shows that have been recorded

After choosing Live Channels a listing of the channels used by MythTV is displayed.

When a channel is chosen, the currently playing TV show on that channel is shown.

Note that channel changes can take some time depending on the DVB-S2 tuner card and configuration being used by MythTV.

Viewing the Electronic Program Guide (EPG)
After choosing Guide a listing of channels used by MythTV is shown.

When a channel is chosen, the listing of upcoming programs on that channel is displayed.

The last thing is to enjoy the HD satellite programs as you like. That is to say, TBS 6925 would be a perfect TV tuner card for Mythtv .You should never miss it.

Related article: TBS 6925- Most Professional Satellite TV tuner Card

TBS PCI-E TV Tuner Card Comparison